Designed for efficiency, the troubleshooting guide for pool pumps ensures that you are able to fix a pool pump breakdown as fast as possible before it can have a huge impact. It is obvious that pool pumps will at one point breakdown, and how fast and effectively you handle the problem is what really matters. Regardless of what brand you have, whether the Hayward super pump or other brands, you will find this troubleshooting guide extremely useful.

 troubleshooting guide for pool pumps

Common Signs of Pool Pump Breakdown

How do you establish that you need to make use of the troubleshooting guide for pool pumps? The reasons why pool pumps breakdown are many. Running the pump with pool prime or leaking pipes are example of such problems. Here are some common signs.

  • The pool pump fails to run. This problem is mainly caused by faulty switches, breakers or timers.
  • The pool pump running too hot and going off. This problem emanates from the power source especially where it is not adequate. Undersized rating may also be a contributory factor.
  • The pump becoming too noisy. Excessive noise is a sign that there are parts that need replacing. The bearings, for instance, could be worn out. Corrosion is another cause, which can be easily handled.
  • The pump cuts on/off regularly. This too is an electrical problem that needs expert attention.
  • Presence of water bubbles in the swimming pool. Bubbles are pointers that there is some leaking taking place; whether from the underground pipes, faulty skimmer or gasket is damaged.
  • The pump lacks adequate pressure. Clogging or debris in the piping system is usually the main problem.
  • High energy consumption. The secret to reducing energy consumption for your pool pump is to make filtration more efficient and probably upgrade to the energy efficient pool pumps.

 hayward super pump

Specific Steps for Troubleshooting Pool Pumps

So, after you have established the source of your pump’s problem, how do you fix it? This troubleshooting guide for pool pumps takes through the specific steps that you may take to get your pump working properly again.

  • Troubleshoot the pool pump motor. Pump motor fails if it lacks power or because of failure of the circuit breaker. Ensure that these two are working as supposed, and if there is no improvement, expert attention may be necessary.
  • Troubleshoot the pool pump’s wet end. The part that’s called the wet end consists of these parts: impeller, seal, pump cover gasket, pump housing and the drain plugs. Check any of these, if your motor is working and the pump cannot function properly.
  • Make your pump run free of air. Make sure that all parts capable of leaking are fast sealed to keep air totally out. These parts are the suction valve, drain plugs, volute gasket and the pump lid gasket. Keeping them completely air tight is of paramount importance.

What if the troubleshooting guide is not working? At this point, you may consider replacing the entire unit. This troubleshooting guide is a simple process that you can do by yourself very easily. Use this guide and fix your pool pump fast and effectively.