Pros and Cons of Room Insulation

If you have planned to insulate your home you must first consider your room. Radiant barrier insulation is very common among the people living in warm places. But there is also number of people looking for insulation materials for sound control as well.

There are also rooms that need to control the moisture like in the laundry and bathroom so different materials will be used for this type of room.  But like any other installation found in your home there are still pros and cons once it is being installed. Below are the list of all the pros and cons once you have insulated your room.

room insulation advantages and benefits

Advantages of Room Insulation

  • Energy Efficiency: Since insulators are poor heat transmitters it deliberately lowers down the rate of heat entering your room. Once your room is insulated you will not use so much of energy just to uphold the relaxed room temperature. Insulators penetrate the excessive heat from its surface. In contrary, it will also hold back the heat for a longer time that is very useful during cold times like winter. For simplified explanation, insulator will help the temperature balance.
  • Friendly to the Environment: Insulators are mainly made from steam retarders, air barriers and thermal bridges that could prevent the heat from escaping the wall. In connection with energy efficiency this is also friendly to environment, since there is lesser consumption of energy by using few heaters and air conditioners. The connection of the two is the more energy consumption the greater carbon dioxide produced that could damage the environment and produce pollution. According to the study it could diminish the energy consumption up to 40 percent.
  • Noise Reduction: As mentioned earlier insulators reduces noise. Once insulators are placed in your wall it will serve as the barriers and absorbs the sound.

health risk facts about room insulation

Disadvantages of Room Insulation

  • Rain Penetration: Based on the study conducted by the Building Research Establishment, insulation in your room does not totally stop the rainwater from piercing the “outer leaf of masonry”. As a result it will create moisture and dampness.
  • Health Risks: There are materials like Nitrogen-based Urea-Formaldehyde (UF) Foam that is very unhealthy. There are materials that could cause lung cancer and gastrointestinal tract cancers. Fiberglass could be the reason for skin allergies because of the chemicals mixed with it. And styrene insulator could harm your liver and reproductive system and could be the reason for the irritation of your eyes and respiration.

List of Modern Products for Insulation

There are different modern materials for insulation. Below is the list of modern materials and alternative materials used in insulation.

good decorative PVC fiberglass ceiling

  • Glass Fiber (Fiberglass): In a place like cathedral ceiling wherein there are very low cavity space, fiber glass must be used for insulation. There are companies that make combination of glasses and fuse it together for the purpose of safer and less irritating products. All loose fiberglasses have the same functions in terms in thermal insulation.
  • Mineral Wool: There are three types of mineral insulation: glass wool, rock wool and slag wool. The very good thing about mineral wool is that it is fire resistant.
  • Plastic Fiber: This type of insulation does not eagerly burn and it is non- irritating. Like a typical plastic it will just melt once bared to flame. The downside of it is that, when it is being exposed to flame, it melts.
  • Nitrogen-based Urea-Formaldehyde (UF) Foam: This foam, which is also usually coined as Urea-Formaldehyde (UF) foam has already existed and has been in use since 1970 but because of all the related health issues it was stopped. It uses dense air for expanding.
  • Phenolic Foam: This material is widely used for foam board insulation. It is effective but has disadvantage effect.
  • Polyurethane Foams: The polyurethane foam uses non- CFC also known as chlorofluorocarbon gas. It is sprayed to all the cavities with open walls and automatically fills and seals the cavity. It is water and steam permeable, flexible, and is resistant to moisture and fire. It also provides high-quality air sealing.
  • Cementitious Foam: This foam insulation is used in closed cavities. Avoid contact to water so that it will not be damaged.
  • Concrete Block Insulations: There are varieties of shape and composition of concrete blocks. It is widely used in the United States. It is very common upon the filling of all the webs.
  • Specialized Devices: Devices are used for insulating the attic ductwork by filling the loose materials.
  • “Natural” Fibers: There are several natural fibers like wool, cotton, straw and hemp that are used for insulation.
    • Cotton insulation is the same with fiberglass and cellulose insulation.
    • Wool and hemp insulation have the same fibrous insulation types. They are used in places that are industrialized.
    • Straw bale is widely used sometime ago but since there are still flaws of using it, people discontinue using this kind of materials for insulation.

blue jeans insulation

Those mentioned above are some materials used for radiant barrier insulation that could diminish the heat entering into your home especially during summer time. Most of the materials does not absorb the heat but instead reflect it.

Tips on Insulation Installation

Insulation installation can be done in various ways, not just one, and all the ways to do it are basically easy enough, you only have to figure out what will work best with you, and what would be most convenient for the kind of area that you are going to install insulation in.

Installing installation is not that difficult, and you don’t have to shy away from it because of the mindset that the process involved in accomplishing is too complicated for you. Also, insulation  installation cost vary; there are some types that might be more expensive than the others, but you can choose one that will fit your budget. For those who want to try radiant barrier insulation installation, they can do so on their own, and they can be assured of positive results as long as you know how to do it the right way.

insulation installation tips and guidelines

Basic Tips in Insulation Installation

1.) Equip yourself with the right tools that are need to accomplish the task.

  • You don’t necessarily have to buy the most expensive tools that you can set your eyes on when you search for what you are going to need in your local hardware or do it yourself store.
  • The tools that you are going to need for home or basement insulation installation are pretty basic, and most of them can already be found in some tool boxes in most houses. This boxes usually also contains a manual that has insulation installation instructions in it to guide you throut.

What you will usually need for the normal insulation installation jobs are:

  • utility knife
  • insulation knife
  • tape measure
  • stapler

2.) Protect yourself sufficiently with some materials that you need to procure in addition to the basic materials that you need to do the insulation installation.

  • Some people make do without these protective materials because even if these are absent the job can still be done. However, many people who have tried doing it on their own have found it highly advantageous that they feel secure that they won’t harm themselves while accomplishing the task.
  • Also, it is definitely a lot better to be completely safe.
  • The things you will need are also very simple and easy to find. This materials would include:
    • a pair of durable but lightweight gloves to have you protected and your hands and at the same time allow you to move very comfortably
    • a long sleeved shirt
    • goggle or glasses that’s protective
    • gas mask

safety insulations installations

3.) When you are doing fiberglass insulation installation, do not open it until you are really going to start and are already ready to get the job done.

  • This is because the material used for this is compressed in the factory, so when the pack is opened, it expands a great deal, which is something that you don’t want to happen a long time before you are actually going to start the process of insulation installation.
  • When you are going to install in those cavities that has wires, always remember to split partially the wire in the portion wherein it crosses paths with a wire to have the wire insulation capsulated so that there would be no space that is behind the insulation.

Radiant Barrier Insulation: How It Works

A great way to reduce your heating costs this winter is by using a radiant barrier insulation, which is a brilliant new concept. Instead of trying to absorb heat or create heat – both of which are costly and aren’t as effective as they could be, this method reflects heat from the environment to where it is needed.

Since there is ambient heat all around us, from sunlight, from the ground, from nearly everywhere, what it does is to reflect that heat inward, giving us warmth without needing to use as much energy to create heat, which in turn can be very costly.

save more energy with radiant barrier insulation

How to Utilize It

  • Focus It Upward: One of the best ways to utilize this technology, which has been put to use by the space program for years, is to focus your attention upward – where there is more direct sunlight and more surface area to capture and harness that sunlight.
  • Place it in the Attic: Attic insulation radiant barrier is a great application of this simple philosophy. The radiant barrier insulation is placed in the home’s attic to reflect the heat from the sun into the home, increasing the heat in your home and dramatically reducing your energy bills.

radiant barrier attic installation

With the ever rising energy costs, this is a great way to save you and your family money and you are harnessing the power of nature – what could be more environmentally friendly than that?

Though the applications for radiant barrier insulation reach far beyond your home, this new application has really captured the attention of the construction world, and more and more homes are being built using this technology. Many of you may still be skeptical about the benefits of using this technology, but radiant barrier insulation reviews by consumers show that this new theory is heating up the insulation world, and giving the traditional fiber glass insulation a run for its money.

home radiant barrier insulation

Other Benefits of Using Radiant Barrier Insulation

  • Aesthetic Appeal: The look of the radiant barrier foil insulation is a very good aesthetic for most homes.
  • Reduces Electricity Bills:  Utilizing this method of heating and cooling will not also help reduce your overall energy costs permanently, which in turn is a great way to give added value to your home.
  • Sustainability: More and more Americans are looking for more sustainable ways to maintain their homes and nearly all of us are looking to save on the ever rising costs to maintain a comfortable lifestyle without spending all our time in doing so.
  • Eco-friendly: Being able to find an economical way to heat your home using eco-friendly technology so powerful, that it’s been used by the space program to heat and cool the space shuttles, is the new age of insulation.
  • Efficiency: Being able to take what heat is already available and simply reflect that in, to heat your home is a stroke of brilliance and an idea whose time has come.

energy efficient radiant barrier insulation

Take advantage of this new energy saving insulation method and you will save thousands of dollars in heating and cooling costs for your home over the next several years. Once you’ve switched to radiant barrier insulation, it would be hard to imagine going back to the traditional methods of insulation.