Absorbent pads are underused in most businesses and households. Most people don’t think of absorbent pads, much less the various uses of absorbent pads. Don’t be most people. Think of the savings in time and energy you could enjoy if you were prepared for a spill instead of just reacting to it.
One of the uses of absorbent pads could be under the sinks, kitchen and bathroom. Every time something leaks, and something always leaks, the absorbent pad would already be dealing with the issue. Then you would just change the pad, completely avoid the messy clean-up procedures using a rag or paper towels. Of course, if you didn’t think to use the absorbent pad in anticipation of a leak or spill, you could use it after just as well and it would still be less messy than a bunch of paper towels.
Another use of absorbent pads is in the garage storage areas. You could place an absorbent pad under storage areas for the following items:
- Paint cans
- Gas cans
- Coolant bottles
- Oil cans and bottles
- Water heater
If you stand in the middle of your garage and look around, you probably could identify many more areas. In fact, check under your feet. If you have an oil stain on your garage floor, you could use an oil absorbent pad to safely absorb that oil leak and save yourself the mess of trying to clean it up with chemicals and water.
- You can use absorbent pads in the trunk of your car to prevent the spills that will inevitably happen from ruining your trunk’s interior flooring.
- On long family trips, you could keep the absorbent pads handy for drink spills, wet dirty feet, and wet dirty dogs. You will find them much more satisfactory than the random tissue or even that roll of paper towels you grabbed on your way out of the door.
- You could pack an absorbent pad in your liquids bag or box before you stuff it into your suitcase and maybe make it to your destination with a clean dry shirt.
Work areas outside the home can benefit by identifying areas where leaks are likely to happen. You could proactively use absorbent pads where it makes sense. Still, you would want to keep absorbent pads handy for a quick clean up when a leak or spill cannot be anticipated.
The more you use absorbent pads in your day-to-day activities, the more uses of absorbent pads you can identify.
A longstanding rule of car maintenance has been to change your oil every three thousand miles. But, with the advancement in modern engine technology, that rule may no longer be applicable. Although they operate on basically the same principle as their older cast iron counterparts, todays engines are built to be smooth-running, efficient machines. Less friction means less wear-and-tear, and can also significantly increase gas mileage.
Although your car’s operator’s manual may still suggest that you adhere to the three-thousand-mile rule, many independent shop owners will tell you that it is okay to bend that rule a little.
What You’ll Need
- The first thing you’ll need is oil obviously. Make sure you choose the right weight. You can refer to your operator’s manual for the correct brand and weight.
- An oil filter. Again, refer to your operator’s manual for the proper type. Or, you can ask your local auto parts store what type fits your particular automobile.
- An oil receptacle. If you are changing your oil at home, or in your garage, you’ll need some place to store the spent oil. Whatever you do, do not let the spent oil trickle out onto the ground. That would harm the environment, and is probably against the law in most states these days. Being environmentally conscious is the first principle in car maintenance.
Getting Down To Business
- Make sure you cover the area where you’ll be working with an oil absorbent material. This will protect your driveway or garage from the oil.
- Place the oil receptacle directly underneath your car’s oil pan. You’d want the spent oil to go directly into the opening and not splatter all over the place.
- Remove the drainage plug situated on the bottom of your car’s oil pan and wait until all the oil has drained out before replacing the plug.
- Remove the old oil filter. At this point, most do-it-yourselfers make a big mistake: They attach the new filter straight out of the box. Wrong! Before attaching the new filter, fill it with oil first. This ensures quicker lubrication of your car’s engine when restarting. Protecting your car’s engine is the second principle in car maintenance.
- Using a funnel, refill your car with the oil specified in your operator’s manual, using only the amount specified there also.
If you’ve followed these simple instructions correctly then cleanup should be a breeze, and your driveway won’t have any of those unsightly splotches that disfigure so many others. The spent oil can be recycled. Simply take it to any of the major auto parts stores and they’ll take care of it for you. And the good news is, it won’t cost you a penny. Saving money is the third principle in car maintenance.
What is the use of absorbent pads in oil spills? Oil absorbent pads are very important especially when oil spills happen. This is because oil spill pads are like first aid solution when oil spill arises. This particular kit is very important, for this will save you from getting damages as well as fines. These disposable absorbent pads are specifically designed with fibers in order to absorb and contain the oil spill.
Basically, there are two types of leak absorbent stuffing used. One type is the pads of which 3m oil absorbent pads are commonly used. And the other one is the boom types. These two types commonly work together. The boom contains the spill while gradually absorbing it while the pads absorb them much faster. Below is a detailed description on how it works.
How Oil Spills Are Contained
- Oil Absorbent Booms Or The Socks
Just like band aids, booms or socks play the same role. This type of absorbent material has the “containing” as well as “absorbent” qualities. However, this is usually use as a primary tool to sip or contain the oil in a certain area. Generally, it will stop the oil from diffusion by simply forming a barrier just around the spill. What’s great about these booms? They can be interlinked together through the use of carbon metal hooks. And since it is tubular in shape, it can cover bigger areas compared to absorbent pads. This type of absorbent is easy to use. First, you just need to drop the booms close to the perimeter of the affected areas. Then, you need to connect them creating a circular enclosure. There are two types of booms though; the land use and the water use. The water use type floats and used to contain spills on water bodies. Land booms on the other hand are dropped on land to prevent oil from seeping below ground which may contain ground water and other land animals.
These pads act like cotton balls found inside your first aid kit. These pads are usually white in color and will not sink when placed in water. These absorbent pads also have anti-static qualities in order to prevent sparks to start a fire. Just like with the booms, pads need to be scattered over the spill. You need to place first the boom then followed by the pads. You also need to ensure that you cover the spill surface as much as possible. Since it is colored white, you’ll know when to replace the pads. Continue changing the pads until all the spilled oil is contain.
Containing spills, especially oil spills, is very tasking. Proper procedure needs to be implemented to effectively contain the situation. Ultimately, prevention is still best than remedy.
Do you get frustrated when after all the safety precautions have been made you still end up with messy spills on your lawn or in the floor? Sometimes hazardous chemicals might spill or leak even if safety precautions were applied. Spill kits play a very vital role to clean those hazardous chemicals that might pollute both the land and water. There are different types of spill kits and they can be identified according to the material that are used to take care of the spills. There are oil absorbent materials that you can sprinkle on top of the contaminants or sponge-like absorbents that you arrange around the spill in order to contain or prevent them from further spreading on the ground.
Inside the Spill Kits
The capacity to contain a certain quantity of spills also vary. The materials are usually kept or stored in a bucket where most of them have wheels and on the side are other compartments in order for you to separate different types of oil spill kits. For example, small kits may just consist of an oil absorbent bag as well as sand, sawdust or it might be a product that is similar to kitty litter. These are actually designed to wipe and clean up oil spills that are about five to seven gallons of liquid. These oil absorbent kits also include protective goggles as well as gloves.
To Better Understand Spill Kits
On the other hand, there are larger spill kits. These kits contain bucket of spill containment kits like socks or pillows. They are not your ordinary socks and pillows used at home. Here is a quick description for both of them especially made as part of the different types of spill kits;
- Socks – Socks included in the kit are elongated tubular objects that are specifically designed to place around the area of an oil spill to prevent from spreading to other parts or area.
- Pillows – Now, aside from socks there are also pillows included inside the spill kits. Unlike with socks, pillows are placed on top of the hazardous chemicals or oil spill. These pillows are highly absorbent. This certain kit might contain masks, gloves, goggles together with the instructions on how to use the product or components inside it.
Users need to be careful also because there are spill kits that for water used only. The kits for water have special absorbents which allow them to float on water. Because of this, the material can now absorb the chemicals or oil being spilled on water’s surface. Many factories as well as factories do have this kind of kits purposely designed in case of oil spill emergency. These kits are located near the areas with products that are hazardous for easy access when needed.
Truck spill kits are also available and must be always ready for truck drivers to be used, especially for those who haul hazardous waste in long distances. Spill kits plays a very important role in public places as well because you’ll never know when an accident might happen.
There are a lot of incidences at home that can cause dirt and stains especially if you have kids around the house. Oil spills are perhaps one of the worse cases since this substance is very hard to clean and eradicate to almost all forms of surfaces. Fortunately there are oil absorbent pads and mats you can use to speed up the cleaning process. This helps to remove any oil based substance in any surface and make it go away like it never happened.
Using Oil Absorbent Material
It is common knowledge that oil and water doesn’t mix and resist each other. That is why cleaning oil spills or stains that contain oil are hard with water. There are even oils that resist alkaline compounds such as detergents. That is why you need a material to absorb or transfer the oil from one surface to the other. Oil absorbent mats and pads will enable you to do this through the use of hydrophobic material.
The oil absorbent material acts quickly to avoid any lasting damage to the environment around it. Oily compounds when left on the surface for long periods of time will be harder to remove. One would need to use certain techniques to remove hardened oil compounds in certain surfaces like using hot water or special chemicals to reactivate the oils and make it easier to remove. Hence, it is important to remove oil spills and stain immediately that is why having oil absorbent materials around is wise.
Different Types of Oil Absorbent Materials
Pads and Mats
The pads and mats are available in various sizes. Most of these are for household use. For minor oil spills, cleaning up oil and grime in the kitchen particularly in the oven, stove and stove exhaust where there’s usually a lot of oil residue. Use oil absorbent pads and mats like a rag and wipe off oil residues in surfaces.
Earth and Compounds
You can also find oil absorbent earth compounds, sweeping compounds and others alike. These are used differently wherein the material is laid over the oil, absorb it and remove the oil-material compound after some period of time. This is commonly used in roads and ideal in garages that deal with motor oil.
There are different needs for oil absorbent materials, including when there are spills on a road, in the water or even just in the garage when dealing with vehicles. Spills in oceans and seas delicate and would require a special kind of absorbent compound. An oil absorbent mat or pad will soak up the offending material while preventing the water from soaking up too.
Cleaning oily spills, stains and grime is a daunting task without the help of oil absorbent materials. So ensure you do your cleaning right in dealing with oil. Since it is vital to clean up oily mess immediately, it is therefore important to have some of these products at home and in every place that deals with oily compounds to avoid getting an oily mess permanent.