Buying a new transfer pump is not something that you should consider lightly. This kind of equipment is typically used in transporting corrosive materials so it is very important that you have the right equipment for the task. Liquid transfer pumps were designed to provide simple but safe transferring of a wide variety of fluids that include those that are dangerous and difficult to handle such as solvents, acids and bases. The pump allows fluid containers to be transferred and filled into another container quickly or disposed without the danger of splashes and spills.
Safe storage of liquids like strong alkalis, cleaning chemicals, lubricants, oils, liquid food products, strong acids and other types of chemicals is a huge issue for many people who work with such products. The same concern is shared by companies that must adhere to a strict set of rules on workplace health and safety. Thus, there are various kinds of transfer pump models that are available on the market as well as different pump tube lengths, to satisfy the various needs and requirements of a diverse customer base. This is the reason why there is a specialized oil transfer pump for transferring oil products and fuel transfer pump for handling fuels that are available on the market.
Factors to Note When Buying a Transfer Pump
There are several factors that will affect the requirements that you are searching in a transfer pump. These are the following:
- The Kind of Pump – Since there are different kinds of pumps, a particular model may or may not be right for your particular needs. The choice will typically be either displacement or dynamic pumps that each has their own relative advantages. A displacement pump works through compression, changing the volume of the fluid in a special transfer chamber. The dynamic pump, on the other hand, uses the fluid’s velocity to drive it through an outlet port that is controlled by pressure. It could turn out that a hand operated pump is the best one for you, especially if you are going to transfer fluid from a big container or storage facility into a smaller vessel. The concept is that since you have greater control on how the fluids are transferred, there is less amount of waste. This will not only save a lot on cost but also prevent potential accidents from happening.
- The Construction of the Pump – The material used for the construction of the transfer pump is another major consideration although this will be determined by the kind of liquid that you are planning to transfer. Whether or not you need the pump to be versatile should be considered as well, since you will be moving different kinds of liquids. If you will be transferring harsh chemicals, your best option would be polypropylene, which has been approved by FDA for the task. In addition, metal components are phased out in a polypropylene transfer pump, eliminating the hazard of them wearing down in the long run.
Other factors that should be considered in a transfer pump include the capacity to tolerate the desired amount of flow and pressure as well as the suitability of the equipment for future industry demands.