How To Adjust Bike Brakes

If you own a bicycle, it is important to know how to adjust bike brakes. Even though the latest braking systems are designed with safety and power in mind, you still need to understand how to care for these components. Continue reading as some tips will be provided below to help you to adjust the brakes on your bike.

Tips On How To Adjust Bike Brakes

Regardless of the problem that you have with the brakes, maybe they are too loose or tight, you must have an idea how to fix it. When the brakes are too tight, this will cause rubbing against the wheel and this will slow down the bike. When they are too loose, the bike will not get sufficient power. The following will help you to fix problem with slipping brakes:

tips on How to adjust bike brakes

  • Look at the brake lever on the handlebar for a screw adjuster. You are going to increase the power in the brake by turning the adjuster in a counterclockwise direction in order to add some tension to the cable. If the brake lever can be pulled all the way to the back of the handlebar, you need to add more tension.

  • Use an adjustable wrench to slacken the nut that is keeping the cable connected to the brake. After that, use pliers to pull on the cable until it’s tight. When the cable is tight enough, you can use the wrench to tighten the nut.

  • You can follow the same process to fix the other brake. When you are done, the braking system should be in good working condition.

How To Adjust Bike Brakes That Are Rubbing

You can use an alignment screw to fix your brakes that are rubbing faintly. Here is how you can do it.

  • Start by lifting the bike off the ground in order to spin the wheels.

  • Next, look behind the wheel rim for a small screw. Use a tiny Phillips screwdriver to turn the small screw very slowly to remove the brake from the rim. This might just need a bit of adjustment, so work slowly and spin the wheel frequently to check for rubbing. If the rubbing is serious, you need a brake cable to adjust the brake. You can use an adjustable wrench to slightly loose the nut that is holding the cable unto the brake.

  • After that, you can retighten the nut and test for any rubbing sound by spinning the wheel. Press the brake lever several times to check if the slack cable reaches the brake and if necessary you can loosen the brake cable some more.

best sturdy tektro brakes

  • Once this is done, you can repeat the entire process on the other wheel.

Keep in mind that these are just some of the problems that you could have with your bike brakes. But, once you know how to adjust bike brakes you can ride much safer and easier. Note that these tips will help to fix bikes with frame-mounted brakes, so it’s best to get a professional mechanic to fix hydraulic disk braking systems.

Lastly, you need to understand that you should always buy parts or accessories for your bike from reputable brands or dealers. This way, you are guaranteed to have reliable brakes, pads or other accessories that can last a long time. When you are shopping, it’s best to choose well-known brands. Tektro brakes are definitely one of the options to consider as these products have been tested and proven.

Basic Types Brake Parts

There are many bike brake technology in the history of bicycles and there are still various types still in use up to the present, sold by known companies like Tektro brakes. The usual types are the disc brakes, the rim brakes, or the drum brakes. Before you can be a biker, or a professional one at that, you need to have a good understanding of the brake parts that play a very important role in your biking experience and your safety as a biker.

How Bike Brakes Work

Basically, bike brakes and the brake parts use many systems of cables, levers, and rubber pads in order to create rubbing or friction on the bike’s rim or wheel rims in order to perform the function.

best brake parts

Some of the bike brakes have turned out complicated as people looked and manufactured bicycles for more safety and efficiency for the bikers. The power of the break goes hand in hand with the light weight of the road bike, whereas a mountain bike needs the power with resilience to debris and trauma encountered on the road. Each of these brake parts has its own unique features and parts.

Types Of Brake Parts

Read and get to know these various parts of your bicycle’s brakes:

  • Brake Pads

These are rubber pads in particular that are placed on the disk brakes. Basically, they are steel backing plates that have a material that creates friction on the surface and is a very important part of the braking system of the wheel. This is one of the cheap brake parts that are also equally easy to install. They come in many varieties and types which are better than the others. One of the popular types is the ceramic brake pad, which is not only of good quality but also has great advantages over other pads traditionally seen on the market.

  • Disc Brakes

These are hydraulic and are found on mountain bikes. They have a better braking power as well as resilience especially to combat the off-road riding experience.

  • Cables

These are activated using a thin metal, wherein a cable is pulled by the bike rider in order to stop the bike from running.

best brake parts warehouse

  • Brake Level

The brake level is controlled on the bike’s handlebars from the lever. The purpose of these lever is for the rider’s convenience to enforce force on the cable and in effect to slow down the bike.

  • Caliper Brakes

These are mounted above the wheel on the frame of the bike and use the pads against the lever on to the rim of the wheel. This is what is usually used on the road such as when racing.

When it comes to brake parts, it is very important that you install high performance brake parts because of safety reasons. The good news is that in case you have problems with parts of your brake, these are readily available locally or online. There are many brake parts warehouse that has a wide array of options for the bikers. Usually these outlets keep local products and imported parts that have a slight difference in price. In this case, it is a choice between quality and price versus safety of the rider.

Fixing Bike Brakes

If you know how to fix bike brakes, you would be more confident to travel long distances, even when you know there is no one else to help you in case something happens to you while you’re in the road with your bike. This is the reason why you need to know more about bike brakes. This type of scenario is especially true for new bikers or women who feel that adjusting bike brakes are things that only men and bike mechanics can do. Just so you know, knowing how to adjust mountain bike brakes could make a difference and could save your life.

best bike brakes

Bike Brake Adjustments

Bike brakes can only have two possible concerns: either they come to be very tight or they can be too loose.

  • Tight Brakes – If the brakes come to be extremely tight, they rub on the wheel then consequently cause you to slow down.
  • Loose Brakes – If the brakes are also too loose, they would not be able to give you the stopping power you need to avoid disaster.

These are the reasons why the brakes have to be properly adjusted so that you have a wonderful biking experience that is safe for you.

How To Fix Bike Brakes

There are many bike brakes that are incredibly safe and powerful nowadays, especially in the latest available bikes we see in the market today. However, proper care and maintenance should still be provided. An example of this is the Tektro brakes, which is also powerful but inexpensive. The only catch is that it puts too much stress on the brake pads requiring bikers to do constant alignment and adjustment on the bike.

Here are the steps to fix your bike brakes:

  • You need to provide a way to have the bicycle lifted off from the ground and be able to spin the wheel. You can do this by mounting your bike on another object or perhaps on a table.
  • Is the rubbing not too much or just faint? If it is, that can surely be fixable with a screw for brake alignment, which is found on the rim of the wheel break. Once you have found the screw, turn it slowly using a Phillips screw driver to any direction until such time that it does not contact the rim anymore. Spin then next the wheel again and again to ensure that it does not rub. In most cases, a very small adjustment is just enough.

Shimano's 2013 Saint Mountain Bike Group - Race / Gravity compon

  • If the rubbing is too much or extreme, you have to adjust the cable of your breaks and not just the brake-alignment screw. You can do this only by using an allen or an adjustable wrench. Loosen a little bit at a time the nut that holds the cable of the break to itself. Loosen up the cable a little bit and re attach the nut. Spin the wheel frequently again to make sure that it no longer rubs.
  • For the break lever, squeeze it many times again to make sure that in the bike brakes, there is no more rubbing. Did the slack that’s new on the cable already reach the brake? You might need to readjust the cable or the screw again if necessary. Do the same thing in the other wheel.

Note that if your bicycle has a hydraulic brake, only a mechanic can do the adjustments. These instructions are only for those types of brakes that use a type that is of frame mounted or ones that we grasp to hold the rim of the wheel.

Tektro Brakes – Your Safety Best Friend

Safety concerns have always been the biggest reason why people do not go biking as much as they want to. The Tektro brakes, however, have shown over and over again that it is really possible for people to go and enjoy biking and not worrying too much about their safety.

Features of Tektro Brakes

One reason why commuter bike owners are picking up this amazing brake system is because it really does stop when you pull the lever. Unlike other brakes in the market today, the Tektro disc brakes can come to an effective full stop when you want and need it to.

best tektro brakes

This is a far cry from the traditional brakes that have at least a second or so in terms of delay. The Tektro brakes are also effective thanks to the multiple technologies that have been imbued in these great brakes

  • Integrate Bell Design

The integrated bell design for the Tektro bike brakes attaches neatly into the bike’s handlebar. The ergonomic lever is also clean and uses a minimalistic approach. To make things better, the brake’s lever can work with different types of bikes. The bikes that will work well with the brakes’ design include folding bikes, city bikes, road bikes and MT or Mountain bikes.

best tektro disc brakes

  • Sensor Control Design

Once installed onto the bike, the sensitivity on the disc brakes automatically kick in. A short pull on the lever will slow you down while a hard pull will cause your bike to completely stop. This unique sensitivity is what dictates the safety of the rider.

The Tektro V brakes are fast becoming an important fixture in a lot of city bikes. These brakes are becoming a real best buy because they are light, affordable and easy to install.

best tektro v brakes

  • Water Resistant

Having a water resistant brake will definitely save your life in one form or another. A lot of accidents occur during rainy days or even in wet conditions. The Tektro brakes water resistant features will also be a factor that will definitely assure you that your safety won’t be compromised when riding out in the rain.

  • Lock Device QR

One of the reasons why the Tektro brakes are fast becoming the best friend of city bike owners because of the way it can easily be installed into the bigger wheel.

best tektro bike brakes

  • Lightweight

The brakes from Tektro have also proven that it can go toe-to-toe in terms of performance with its more expensive counterparts. These brakes can be mounted behind the front fork without worry as it won’t hamper the performance of the bike. In fact, the low drag coefficient will actually improve the top speed of riding. At 121 grams, these set of brakes are also the lightest among the available brake sets available in the market today.

The Tektro V brakes are fast becoming an important fixture in a lot of city bikes. For some of its efficient technology mentioned above, these brakes are becoming a real best buy because they are light, affordable and easy to install.