There are several reasons that you may have to clean your electronics. Hopefully you know that you should not have anything liquid around your electronic devices, but if you accidentally do, then you need to know how to clean the mess without ruining your device. There are some specific tools you should use when you are cleaning from spills or just getting dust out of your device.
Tools you may use to clean your electronics are electrostatic clothes, contact cleaner, and foam cotton swabs.
You can pick these up at a local hardware store and find them in several regular stores. They are good to have around for routine cleaning.
- These clothes are great because they pull dust particles into them without having to apply much pressure to where you are cleaning.
- This is good when you are trying to clean sensitive areas of your electronics of dust. You do not want dust to build up inside the electronic because it will eventually become so thick it will stop the device from working.
The spray is the easiest way to remove dust and dirt from sensitive devices without doing them any damage.
- Contact cleaner will spray out a cleaning solution that easily dissolves along with air to spray the dust out of keyboards, remotes, and other sensitive electronics.
- You can easily find a can of this cleaner in your local hardware store and it can come in handy for routine cleanings on all of your electronics.
Foam Cotton Swabs
- These are good to clean up spills inside your electronics because they will not fall apart when they get wet.
- They will be able to soak up any liquid you run them across without damaging the inside of your gadget.
- These are inexpensive so it is easy to have some around.
It is important to research the particular device you want to clean. If you take it apart or use the wrong kind of cleaner you may void the warranty. It is important to know what you can and cannot do when cleaning your electronics. At this point, you are probably just trying to save your device from being destroyed. Just be gentle if you do take your device apart and pay close attention on how you can get it back together. Take your time cleaning sensitive devices and you may just be able to save them.
There are three big reasons that you will be forced to clean your electronics: dust, spills, dirt.
How to Clean Dust in Electronics
Dust is something that you just have no control over. The dust can settle in the electronic and just build on top of each other until it is completely clogged.
- You will need to dust your electronics regularly to keep them working properly and to keep them from looking disgusting.
- You have to be careful when cleaning electronics such as computers, remotes, and others that can easily be damaged.
- The best way to get dust out of your electronics safely is by using a contact cleaner. These cleaners spray a cleaning agent and air into the electronic that quickly dissolves leaving you dust-free.
This will ensure that your device works properly and regular cleaning will prevent you from having to replace it.
How to Clean Spills in Electronics
It can be so frustrating when you spill something into your electronics. The way you handle clean up is critical to if the device is destroyed or salvageable.
- Immediately turn off the electronic if it is on and wipe as much up as you can with a towel.
- Sometimes the spill is just on top of the device and it has not made it inside which is lucky because it is a lot easier to deal with.
- Now if it did get inside the device you have some more work to do. Take it apart, as much as you can take off covers and corner pieces so that air can get into the device.
- Now gently wipe the inside the best you can, at this point, you are just trying to fight to save it.
- Use as little pressure as possible to clean the inside and just be careful. You might use smaller cleaning tools like q-tips. Just take your time and get as much of the liquid out as possible.
How to Clean Dirt in Electronics
Dirt is less common to get into your electronic devices but it can happen. One example is if you drop your cell phone into a mud hole. This can be more damaging than dust because it is thicker and can cause more damage. It is still possible to clean the device where it will work, but it is going to be a little more difficult.
- The contact cleaner will help get a lot of the dirt out of the inside, but some of it might be stuck.
- You may have to contact the electronic company to see what they suggest if you cannot successfully get the dirt out of it.
Stainless steel is a famous and a good quality material used on many of our household materials wherein one of its best qualities is its hardness. If you want a top of the line tableware, counter tops, utensils, pots or sinks, you may have to invest on stainless steel. It is also used in many of our household appliances such as microwave ovens, refrigerator, stove or toaster.
But how do we maintain the polish of the surface of these materials and is there a special stainless steel cleaner that we can use? Is there one best stainless steel cleaner available in the market, and if so, what is it?
Facts on Stainless Steel
While the good thing about stainless steel is its ability to withstand corrosion and rust, it can still depreciate and show marks of frequent use. Over a few uses, especially if you do not know proper care of these products, dirt, grime and dust pile up and this could put the stainless steel at risk. It can dull, and oily hands can put a mark or prints on its surface. The good news is that there are cleaning tips that you can follow in order to prevent these things from happening and be able to maintain the polish of the surface of your stainless steel using stainless steel cleaner.
Homemade Ways in Cleaning Stainless Steel
Here are some of the things you can do with your stainless steel:
- Warm Water: You can do habitual cleaning of your stainless steel using only warm water and cloth. This is a homemade stainless steel cleaner that you can effectively use as a habit for easy maintenance.
- Club Soda: Heat stains as well as streaks may be removed by simply rubbing the surface with club soda mixed with a little water. Then rinse.
- Vinegar: Vinegar is one natural stainless steel cleaner. All you have to do is to get white vinegar or cider vinegar from your own kitchen, dip a piece of cloth on it without diluting it with water then wipe the whole surface clean. This makes it good as new, shiny and free from heat stains.
- Olive Oil: Olive oil may also be a great alternative which has the same effect as using vinegar.
But all these are homemade. If you want the commercial type of stainless steel cleaner, you may want to try the Kitchenaid stainless steel cleaner. This type of contact cleaner is a high quality cleaning product that can be used on any stainless steel material such as those mentioned early in this article. Unlike other commercial cleaners, this one does not need any special tool, only paper towels or sponge. Applying it is all the more simple: just shake the cleaner well, then apply a very thin coating to any stainless steel surface then polish them with the paper towel.
Other Tips in Cleaning Stainless Steels
- Never use abrasives on your stainless steel as this may create a scratched, ugly surface. Examples of these are baking soda or salt.
- Other people create their own stainless steel cleaner using oil, vinegar and water and drops of scents like lemon or vanilla.
The average Joe expects a glass cleaner to clean off dirt and grime from any glass surface with the least amount of effort. In essence, the preferred method would be to spray it on and wipe it off. The question then remains; do all cleaners meant for glass behave like that?
Types of Glasses
First of all, we need to find out the type of glass that warrants cleaning. Essentially, there are 5 popular types:
- heat strengthened
- tempered glass
Although they are made through the same process, they slightly differ mainly in surface texture. For instance, the surface of tempered glass is rougher compared to the surface of the annealed glass. The best glass cleaner therefore would be something that can cover all the types of glasses, right? Not necessarily.
More facts on glass cleaners
Glass cleaners also come in a variety of types that address the different types of glass and the various types of dirt on them. It’s true that we normally use a general glass cleaner for any types of glass since the naked eye cannot detect any aberrations to the glass itself. In fact, we tend to create our own type of cleaner using ingredients found in the home.
Normally, a homemade glass cleaner would require a cup of rubbing alcohol mixed with a tablespoon of white vinegar and diluted in a cup of water. This works much like the commercial glass cleaners in that it evaporates easily when applied with a sprayer. The quick evaporation is brought about by the mixture of the white vinegar and alcohol. There are quite a lot of advantages to this type of cleaner. It’s cheap, very easy to make, disinfects, does not leave any residue and is very environment-friendly.
Advantages of Glass Cleaners
- Sprayway glass cleaner for instance offers the regular cleaner and the ammoniated glass cleaner as part of their product lineup.
- The ammoniated glass cleaners ensure that the area is evenly covered and they are designed to form a thin layer of foam which allows them to stay vertical and further penetrate dirt.
- The application is pretty much through a sprayer and there is no need for any rinsing. Wiping is all that’s needed.
- This contact cleaner also doesn’t haze nor stream and it even polishes after wiping it off and buffing the glass surface a little with a lint-free cloth.
- Their ammoniated glass cleaners have been deemed safe for use on windows, car windshields, showcases, mirrors and more.
- Other commercially available glass cleaners offer a wider coverage. They are safe for use with chrome, porcelain, marble, enamel and other hard surfaces. They also create a layer of foam and leave no film or residue after being wiped off. The alcohol ingredient in others even has various scents or perfume-like qualities.
Whatever the choices may be, every homeowner needs to know that only chemicals and devices approved to clean glass should be used otherwise damages may happen. Good luck for your search for an effective glass cleaner.
A contact cleaner is a product that is used to remove dirt, grease, metallic oxides and oil that result from moisture and corrosion on the surface of small electronic components, relays, ignition systems, electronic controls, thermostats, motors and other equipment where you need a cleaner that will leave no residue and evaporate quickly. There are several brands of contact cleaners that are available in hobby shops, hardware stores and electronic dealers, an example of which is the DeoxIT contact cleaner. It is a deoxidizing solution that acts fast, and is designed for general use on contacts, connectors and other surfaces made of metal. The product also claims to improve electrical connection through chemical means.
Major Features of A Contact Cleaner
- It not just cleans but also lubricates, improves conductivity and protects
- It reduces wear, abrasion, RFI, arcing and intermittent connections
- It is safe for use on all kinds of metal contacts and connectors and unlike other products, is safe to use in plastics
In your search for the right cleaner, you will come across an electrical contact cleaner, which might become a source of confusion. However, such contact cleaners are simply compressed air that has been added with a cleaning agent, which evaporates quickly like isopropyl alcohol. The product is useful if you are going to clean electrical parts that have oil, food or grease in them. Aside from cleaning the various parts, it can also remove foreign elements, which might be lodged in your electrical circuit board.
For electronic parts, you can use an electronic contact cleaner, which has been specially designed for sensitive electrical equipment and electronics. You can use this type of contact cleaner to remove dirt, flux residue, condensation and oil from controls, tape heads, precision instruments, switchers and printed circuit boards. The product is also useful for armatures, electric panels, generators, electric panels and electric motors.
Using Contact Cleaners Safely
Here are the steps in using a contact cleaner safely:
- Wear gloves and goggles to protect your eyes when you use contact cleaners. Breathing too much of the vapor from the spray can may be hazardous to your health so always ensure that the area where you are working has adequate ventilation.
- Shake the container of the product well before use
- Before spraying, make sure that all machinery or electric equipment are turned off
- Test the product on an inconspicuous spot before you spray the entire area to make sure that it is compatible with the area you are about to clean
- Hold the container around six or eight inches from the surface you are going to spray and ensure that it is in an upright position while you are using it
- Allow the product to dry and brush the surface clean or wipe it with lint free cloth. Make sure that the surface is thoroughly dry before turning the machine or equipment on
The product is extremely flammable so you should avoid using or storing it near heat, sparks or fire. You should also keep the contact cleaner away from your skin and eyes.