Fixing Bike Brakes

If you know how to fix bike brakes, you would be more confident to travel long distances, even when you know there is no one else to help you in case something happens to you while you’re in the road with your bike. This is the reason why you need to know more about bike brakes. This type of scenario is especially true for new bikers or women who feel that adjusting bike brakes are things that only men and bike mechanics can do. Just so you know, knowing how to adjust mountain bike brakes could make a difference and could save your life.

best bike brakes

Bike Brake Adjustments

Bike brakes can only have two possible concerns: either they come to be very tight or they can be too loose.

  • Tight Brakes – If the brakes come to be extremely tight, they rub on the wheel then consequently cause you to slow down.
  • Loose Brakes – If the brakes are also too loose, they would not be able to give you the stopping power you need to avoid disaster.

These are the reasons why the brakes have to be properly adjusted so that you have a wonderful biking experience that is safe for you.

How To Fix Bike Brakes

There are many bike brakes that are incredibly safe and powerful nowadays, especially in the latest available bikes we see in the market today. However, proper care and maintenance should still be provided. An example of this is the Tektro brakes, which is also powerful but inexpensive. The only catch is that it puts too much stress on the brake pads requiring bikers to do constant alignment and adjustment on the bike.

Here are the steps to fix your bike brakes:

  • You need to provide a way to have the bicycle lifted off from the ground and be able to spin the wheel. You can do this by mounting your bike on another object or perhaps on a table.
  • Is the rubbing not too much or just faint? If it is, that can surely be fixable with a screw for brake alignment, which is found on the rim of the wheel break. Once you have found the screw, turn it slowly using a Phillips screw driver to any direction until such time that it does not contact the rim anymore. Spin then next the wheel again and again to ensure that it does not rub. In most cases, a very small adjustment is just enough.

Shimano's 2013 Saint Mountain Bike Group - Race / Gravity compon

  • If the rubbing is too much or extreme, you have to adjust the cable of your breaks and not just the brake-alignment screw. You can do this only by using an allen or an adjustable wrench. Loosen a little bit at a time the nut that holds the cable of the break to itself. Loosen up the cable a little bit and re attach the nut. Spin the wheel frequently again to make sure that it no longer rubs.
  • For the break lever, squeeze it many times again to make sure that in the bike brakes, there is no more rubbing. Did the slack that’s new on the cable already reach the brake? You might need to readjust the cable or the screw again if necessary. Do the same thing in the other wheel.

Note that if your bicycle has a hydraulic brake, only a mechanic can do the adjustments. These instructions are only for those types of brakes that use a type that is of frame mounted or ones that we grasp to hold the rim of the wheel.